News

  • Saint-Gobain Automotive Glass Plant in Ihode Finland is coming to an end

    Saint-Gobain Automotive Glass Plant in Ihode Finland is coming to an end

    The automotive market situation led to the worst possible outcome for Saint-Gobain Ihode plant in Finland. The plant is to be closed by the end of year.  Saint-Gobain Glass Finland Oy has today announced the company’s decision to close down the operations of the Ihode windshield plant in it...
    Read more
  • International travel for trade fair participants is possible under certain conditions

    The rule of thumb for international visitors is: Trade fair participants may travel from all countries to Germany provided that certain conditions are met. Travel from non-EU countries is now possible once again Trade fair visitors are considered to be business travelers on an important mission...
    Read more
  • What causes the streaks (rope marks) in my shower glass?

    What causes the streaks (rope marks) in my shower glass?

    Question: My shower glass has the rope marks (streaks) in the glass running up and down. The issue shows up when the glass gets foggy after showering. What causes this effect? Answer: Most likely the effect is coming from the tempering process when glass in contact with kevlar cords in the quench...
    Read more
  • Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass.

    Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass.

    Debates and discussion on what to decide the good tempering furnaces and factors to produce the good quality of tempered glass. Mujash (Supply Chain Professional):  more interesting way to take forward if you ask specifics. pros and cons of each furnaces. – Glaston, EFCO, uniglass, quite a ...
    Read more
  • How to select glass sheet prior to the tempering process?

    How to select glass sheet prior to the tempering process?

    It is so important to select the qualified glass sheet before glass processing, i.e. tempering. Defective glass sheet may lead to quality issues and shattering during the process. Avoid using glass sheet containing stones. Especially in the tensile stress area, even tiny stones could become the c...
    Read more
  • Glasstec 2020 postponed to June 15th – 18th, 2021

    Glasstec 2020 postponed to June 15th – 18th, 2021

    The effects of the Coronavirus have now also impacted glasstec 2020, which will be postponed to 15 to 18 June 2021. In view of the continued uncertainties in terms of travel restrictions and quarantine provisions in the core target markets Messe Düsseldorf has opted in favour of these new d...
    Read more
  • How to maintain the chillers of the glass tempering furnace?

    How to maintain the chillers of the glass tempering furnace?

    The chiller of the glass tempering furnace consists of a roller table and two chillers. One chiller is on the top and the other one is at the bottom of bed. Once there is an explosion in the chiller, the glass debris could damage the aramid kevlar ropes over the roller table, affecting smooth tra...
    Read more
  • Postponement Notice of China Glass 2020

    Postponement Notice of China Glass 2020

    The organisers of China Glass 2020 has confirmed that the show due to be held on 14th – 17th April 2020 will be postponed to a later date. The organisers of China Glass 2020 have released the following statement: Dear Exhibitors and Visitors: In response to the needs for pneumonia epidemic contr...
    Read more
  • Happy New Year 2020!

    Read more
  • Counting of Fragments in Tempered Glass Fragmentation Test

    The fragment count in the standardized fragmentation test in the standard EN 12150-1 is the way to define the safety level of tempered glass and a way to also get an indication about the stress and strength level of the tempered glass. Even though the way to count the number of fragments is defin...
    Read more
  • Stress Mark on Tempered Glass

    Stress marks may be remained on the tempered glass, which are usually caused by the reflection under the polarized light, such as sunlight or other forms of reflected light. The colors of the stress marks are sometimes referred to as iridescent, or the general condition as iridescence. Sometimes...
    Read more
  • How the production affects the glass cutting process

    Everyone who processes this material knows that laminated safety glass (LSG) is unconventional and requires a great deal of sensitivity. The LSG cracks and chips and finally the question arises: What was to blame for the breakage? Was the cutting pressure too low? Was the crushing pressure too h...
    Read more